512
|
Universiti Teknologi Malaysia |
DR AGUS ARSAD |
Department of Polymer Engineering, Faculty of Chemical Engineering (FChE |
Polymer blending and composites, Polymer rheology and processing, Polymer conductive and smart material
|
-
PhD in Polymer Engineering, Universiti Teknologi Malaysia, Malaysia
-
MSc in Polymer Engineering and Science, University of Birmingham, United Kingdom
-
BENG in Chemical Polymer Universiti Teknologi Malaysia, Malaysia
|
-
Characterization and process optimization of castor oil (Ricinus communis L.) extracted by the soxhlet method using polar and non-polar solvents (2015)
-
Influence of different ultrasonic wave on polymerization of polyaniline nanofiber (2014)
-
Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: Mechanical, thermal and morphological properties (2012)
|
511
|
Universiti Malaya |
PROF. WAN HALIZA ABD MAJID |
Department Of Physics, Faculty Of Science |
Low Dimensional PhysicsPhysical Sciences (Organic Electronics, Nanoelectronics, OLED, VOFET, Pyroelectric Sensors, Ferroelectricity, Piezoelectricity, Biomaterials)
|
-
PhD, University Of Sheffield, United Kingdom
-
MSc, University Of Malaya, Malaysia
-
BSC, University Of Wales, United Kingdom
|
-
Determination of energy band diagram and charge carrier mobility of white emitting polymer from optical,electrical and impedance spectroscopy (2015)
-
Enhancing pyroelectric and ferroelectric properties of PVDF composite thin films by dispersing a non- ferroelectric inclusion La2O3 for application in sensors (2015)
-
Ferroelectric and pyroelectric properties of novel lead-free polyvinylidenefluoride- trifluoroethylene Bi0.5Na0.5TiO3 nanocomposite thin films for sensing applications (2015)
|
510
|
Universiti Malaya |
PROF. DR. WAN JEFREY BASIRUN |
Department Of Chemistry, Faculty Of Science |
- Corrosion Science And Engineering (Corrosion)
- Chemical Spectroscopy (Impedance Spectroscopy)
- Coating (Anti Corrosion Materials)
|
-
PhD, Southampton University, United Kingdom
-
BSc (Hons), University Of Malaya, United Kingdom
|
-
Synthesis of heterocyclic compounds of 5-substituted-1,3,4-oxadiazole-2-thiols for the prevention of nickel corrosion (2015)
-
Spongy Nitrogen-Doped Activated Carbonaceous Structure Derived from Biomass Material/Graphene Oxide for Supercapacitor Electrodes (2015)
-
Microstructural development and corrosion behavior of self-organized TiO2 nanotubes coated on Ti-6Al-7Nb (2015)
|
509
|
Universiti Malaya |
PROF. DR. ROSIYAH BINTI YAHYA |
Department Of Chemistry, Faculty Of Science |
Material Sciences
|
-
PhD, Brunel University, United Kingdom
-
BSc Hons inChemistry, University Of Leicester, United Kingdom
|
-
Adsorption of methylene blue on activated carbon fiber prepared from coconut husk: isotherm, kinetics and thermodynamics studies (2014)
-
New terpolymers from n-butyl acrylate, glycidyl methacrylate and tetrahydrofurfuryl acrylate: Synthesis, characterisation and estimation of reactivity ratios (2014)
-
Synthesis, thermal stability, optical and electrochemical properties of halogen terminated azo-benzothiazole mesogen containing smectic side chain liquid crystalline polymers (2014)
|
508
|
Universiti Malaya |
PROF. DR. RAMESH A/L T. SUBRAMANIAM |
Department Of Physics, Faculty Of Science |
Polymer ElectrolytesMaterial Sciences (Rechargeable Batteries, Solar Cells, Fuel Cell etc.)
|
-
PhD University Of Malaya, Malaysia
-
MSc (Material Science), University Of Malaya, Malaysia
-
BSc (Hons) in Chemistry, University Of Malaya, Malaysia
|
-
Transport mechanism studies of chitosan electrolyte systems (2015)
-
Electrical and structural studies of ionic liquid-based poly(vinyl alcohol) proton conductors (2015)
-
Scratch resistance enhancement of 3glycidyloxypropyltrimethoxysilane coating incorporated with silver nanoparticles (2015)
|
507
|
Universiti Malaya |
PROF. DR. GAN SENG NEON |
Department Of Chemistry, Faculty Of Science |
Research interests polymer synthesis and characterization; catalysts; Adhesives and coatings; electrospunnanofibres; microcapsules electrochemical materials
|
-
PhD, University Of Malaya, Malaysia
-
BSc, University Of Malaya, Malaysia
|
-
Polymethacrylate coated electrospun PHB fibers: An exquisite outlook for fabrication of paper-based biosensors (2015)
-
Electronspun biopolyesters as drug screening platforms for corneal keratocytes (2015)
-
Biodegradable Mulches Based on Poly(vinyl Alcohol), Kenaf Fiber, and Urea (2015)
|
506
|
Universiti Malaya |
PROF. DR. AZIZ BIN HASSAN |
Department Of Chemistry, Faculty Of Science |
Research interests processing and characterisation of polymer and polymer composites natural and synthetic fibre composites carbon nanotubes filled rubber
|
-
PhD,Brunel University, United Kingdom
-
MSc, Victoria University Of Manchester, United Kingdom
-
BSc (Hons)), Universiti Kebangsaan Malaysia, Malaysia
|
-
Microstructural and thermal properties of fluoroelastomer/acidic surface modified carbon nanotube nanocomposites (2015)
-
Experimental analysis and theoretical modelling of the mechanical behavior of short glass fiber and short carbon fiber reinforced polycarbonate hybrid composites (2015)
-
Improving thermal properties of fluoroelastomer using carbon nanotubes in presence of air and under nitrogen flow (2015)
|
505
|
Universiti Malaya |
PROF. DR. ABDUL KARIEM BIN HJ MOHD AROF |
Department Of Physics, Faculty Of Science |
Solid State Ionics Physical Sciences (IONIC CONDUCTORS, POLYMER ELECTROLYTES, BATTERIES, SOLAR CELLS, FUEL CELLS, SUPERCAPACITORS)
|
-
PhD, University Of Malaya, Malaysia
-
MSc, University College Of Swansea, United Kingdom
-
BSc, University Of Malaya, Malaysia
|
-
Effect of tetrabutylammonium iodide content on PVDF-PMMA polymer blend electrolytes for dye-sensitized solar cells (2015)
-
Characterization of ionic liquid added poly(vinyl alcohol)-based proton conducting polymer electrolytes and electrochemical studies on the supercapacitors (2015)
-
Thermal and UV degradation of roselle anthocyanin extract and its mixtures with poly(vinyl alcohol) in different acid (2015)
|
504
|
Universiti Malaya |
PROF. DR. A.S. MD. ABDUL HASEEB |
Department of Mechanical Engineering, Faculty of Engineering |
- Materials Degradation (Corrosion, Wear Etc) Engineering Sciences
- Alloy Materials Engineering Sciences (Nanostrcutured materials)
- Electronic Packaging Materials Sciences (Lead free solder, MEMS materials, Materials gradation)
|
-
PhD, Catholic University Of Leuven, Belgium
-
M.Sc.Eng, University Of Eng., Dacca, Bangladesh
-
B.Sc. Engineering, University Of Eng., Dacca, Bangladesh
|
-
Catalyst free Single-Step fabrication of SnO2/ZnO core-shell nano structures (2014)
-
The Wear Behavior of Cross-Linked UHMWPE under Dry and Bovine Calf Serum Lubricated Conditions (2013)
-
Electro deposition of Lead-free solder alloys, Soldering & Surface Mount Technology (2013)
|
503
|
Universiti Malaya |
DR. ZUL HAZRIN ZAINAL ABIDIN |
Department of Physics, Faculty of Science |
- Biophysics Physical Sciences
- Polymer Compounds Material Sciences
- Coating Material Sciences
- Adhesive,coating And Ink Material Sciences
|
-
PhD, University Of Malaya, Malaysia
-
BSc, University Of Malaya, Malaysia
|
-
Thermal and UV degradation of roselle anthocyanin extract and its mixtures with poly(vinyl alcohol) in different acid (2014)
-
Comparison study on the effect of acid and nitrate salt on the properties of poly(vinyl alcohol) coating doped with dye consist of anthocyanin (2015)
-
Electrical and morphological analysis of chitosan:AgTf solid electrolyte (2014)
|