533
|
Universiti Teknologi Malaysia |
Prof. Omar Yaakob |
Department of Ocean, Aeronautics & Automotive Engineering, Faculty of Mechanical Engineering (FKM) / Marine Technology Center (MTC) |
Seakeping and Ship Design
|
-
PhD in Seakeeping Design, Newcastly Upon Tyne, United Kingdom
-
MSc in Marine Technology in Marine Technology, Newcastle Upon Tyne,United Kingdom
-
BSc in Marine Engineering, Newcastly Upon Tyne, United Kingdom
|
-
Numerical study for the use of different nozzle shapes in microscale channels for producing clean energy (2015)
-
Operation, performance and economic analysis of low head micro-hydropower turbines for rural and remote areas: A review (2015)
-
A review on micro hydro gravitational vortex power and turbine systems (2014)
|
532
|
Universiti Teknologi Malaysia |
Prof. Mohamad Pauzi Abdul Ghani Prof. Mohamad Pauzi Abdul Ghani |
Department of Ocean, Aeronautics & Automotive Engineering, Faculty of Mechanical Engineering (FKM) / Marine Technology Center (MTC) |
Naval Architecture and Offshore Structures
|
-
Phd in Ship Science, University of Southampton
-
MSc in Marine Technology, Newcastle Upon Tyne, United Kingdom
-
BSc in Naval Architechture & Ocean Engineering, University o Glasgow
|
-
Mooring effect on wave frequency response of round shape FPSO (2015)
-
Mooring analysis for very large offshore aquaculture ocean plantation floating structure (2013)
-
Experimental analysis of podded propulsor on naval vessel (2013)
|
531
|
Universiti Teknologi Malaysia |
Prof. Adi Maimun Abdul Malik |
Department of Ocean, Aeronautics & Automotive Engineering, Faculty of Mechanical Engineering (FKM) / Marine Technology Center (MTC) |
Ship dynamics, stability and design
|
-
PhD in Marine Technology, University of Strathclyde, United Kingdom
-
MSc in Marine Technology, University of Strathclyde, United Kingdom
-
BSc (Hons) in Naval Architechture, University of Strathclyde, United Kingdom
|
-
Theoretical and experimental analysis of a slack towline motion on tug-towed ship during turning (2015)
-
Fuzzy FMEA model for risk evaluation of ship collisions in the Malacca Strait: Based on AIS data (2014)
-
An innovative vertical axis current turbine design for low current speed (2014)
|
530
|
Universiti Teknologi Malaysia |
Prof. Ab Saman Abd Kader |
Department of Ocean, Aeronautics & Automotive Engineering, Faculty of Mechanical Engineering (FKM) / Marine Technology Center (MTC) |
Marine Transport – Inland waterways
|
-
PhD, Liverpool John Moores University, United Kingdom
-
MSc in Shipping and Maritime Studies, Liverpool Polytechnic, United Kingdom
-
BENG in Marine Engineering, Indonesian Maritime Academy, Indonesia
|
-
Wave exciting forces of a free floating semi submersible in regular waves (2015)
-
Design process of cementless femoral stem using a nonlinear three dimensional finite element analysis (2014)
-
Two degree of freedom vortex induced vibration tests of a riser model using spring bars (2014)
|
529
|
Universiti Teknologi Malaysia |
Prof. Shamsuddin Haji Mohd Amin |
Robotics & Mechatronics Research Group (Robotic Group), Centre of Artificial Intelligence and Robotics (CAIRO) |
In the robotic field CAIRO is involved in the research of Multi-agent Autonomous Mobile Robot, Robot control, Design of Robotics Devices, Robotics, Robust Control of Uncertain System, Large Scale Systems, Advance Robot control, Hardware & Software Co-Design of Mechatronic Systems, Robot Controller Design and Robotic Engineering.
|
|
- Formation control of multiple mobile robots utilising synchronisation approach (2013)
-
Switching between formations for multiple mobile robots via synchronous controller (2012)
-
Synchronizing multi-robots in switching between different formations tasks while tracking a line (2012)
|
528
|
Universiti Teknologi Malaysia |
Prof. Ruzairi Abdul Rahim |
Department of Control and Mechatronic Engineering, Faculty of Electrical Engineering (FKE) |
Tomography, Optical tomography, Image reconstruction, Ultrasonic sensors
|
-
PhD in Electronic Instrumentation Engineering, Sheffield Hallam University, United Kingdom
-
BENG (Hons) in Electronic System and Control Engineering, Sheffield City Polytechnic, United Kingdom
|
-
Renewable energy potentials in Cameroon: Prospects and challenges (2015)
-
Non-invasive process tomography in chemical mixtures - A review (2015)
-
Mobile electrical capacitance tomography (ECT) development for liquid-gas flow measurement (2015)
|
527
|
Universiti Teknologi Malaysia |
Dr. Mohamed Abd El-Moneim Shaaban |
Centre of Electrical Energy Systems (CEES), Institute of Future Energy (IFE)/ Department of Electrical Power Engineering, Faculty of Electrical Engineering |
-
Energy efficiency and management
- Power system stability and micro-grid
- Power system economics
- Integrated resource planning
- Sustainable energy and carbon footprint
- Power quality
- Power system optimization
|
-
PhD in Electrical Engineering, The University of Hong Kong, Hong Kong
-
MSc in Electrical Engineering, Suez Canal University, Egypt
-
BSc (Hons) in Electrical Power Engineering, Suez Canal University, Egypt
|
-
Feasibility assessment of wind energy resources in Malaysia based onNWP models (2014)
-
Renewable energy potentials in Nigeria: Meeting rural energy needs (2014)
-
Overcoming challenges of renewable energy on Future Smart Grid (2012)
|
526
|
Universiti Teknologi Malaysia |
Dr. Hasimah Abdul Rahman |
Centre of Electrical Energy Systems (CEES), Institute of Future Energy (IFE)/ Department of Electrical Power Engineering, Faculty of Electrical Engineering |
-
Energy efficiency and management
- Power system stability and micro-grid
- Power system economics
- Integrated resource planning
- Sustainable energy and carbon footprint
- Power quality
- Power system optimization
|
-
PhD in Electrical Engineering, Universiti Teknologi Malaysia, Malaysia
-
MSc in Energy Studies, University of Wales, United Kingdom
-
BSc in Electrical and Electronic Engineering, University of Aberdeen, United Kingdom
|
-
Identification building energy saving using Energy Efficiency Index approach (2015)
-
Impact of load expansion to the renewable energy system performance (2015)
-
A review on applications of ANN and SVM for building electrical energy consumption forecasting (2014)
|
525
|
Universiti Teknologi Malaysia |
Assoc. Prof. Zainal Salam |
Centre of Electrical Energy Systems (CEES), Institute of Future Energy (IFE)/ Department of Electrical Power Engineering, Faculty of Electrical Engineering |
-
Energy efficiency and management
- Power system stability and micro-grid
- Power system economics
- Integrated resource planning
- Sustainable energy and carbon footprint
- Power quality
- Power system optimization
|
-
PhD in Power Electronics, University of Birmingham, United Kingdom
-
MEng in Electrical Power Engineering, Universiti Teknologi Malaysia, Malaysia
-
BSc in Electronics Engineering, California State University, United States
|
-
Cell modelling and model parameters estimation techniques for photovoltaic simulator application: A review (2015)
-
Perturbative methods for maximum power point tracking (MPPT) of photovoltaic (PV) systems: A review (2015)
-
Application of differential evolution for cascaded multilevel VSI with harmonics elimination PWM switching (2015)
|
524
|
Universiti Teknologi Malaysia |
Assoc. Prof. Mohammad Yusri Hassan |
Centre of Electrical Energy Systems (CEES), Institute of Future Energy (IFE)/ Department of Electrical Power Engineering, Faculty of Electrical Engineering |
-
Energy efficiency and management
- Power system stability and micro-grid
- Power system economics
- Integrated resource planning
- Sustainable energy and carbon footprint
- Power quality
- Power system optimization
|
-
PhD in Power System Economics, University of Stracthclyde, United Kingdom
-
MEng in Electrical Power Engineering, Universiti Teknologi Malaysia, Malaysia
-
BEng in Electrical and Electronic Engineering, University o Strathclyde, United Kingdom
|
-
A distribution network reconfiguration based on PSO: Considering DGs sizing and allocation evaluation for voltage profile improvement (2015)
-
Efficiency optimization of an induction machine using optimal flux control (2014)
-
Design and simulation of electronic ballast performance for high pressure sodium street lighting (2013)
|
